Common Toilet Problems and How a Plumber Can Fix Them Quickly

Certified Contractors

  • Professionalism

  • Safety

  • Liability

  • Quality Work

plumbing2

Toilets are one of the most overlooked plumbing components until they start acting up. From running water to sudden clogs, these problems can disrupt your entire day. On top of that, a malfunctioning toilet can also drive your water bill up.

Fortunately, many of these issues are fixable, and a plumber can help you solve them quickly. Here are the most common toilet problems and how Ortega Plumbing Heating & Air can tackle them for you.

Running Toilet

A running toilet wastes a ton of water and hundreds of dollars in a single month. You might hear water constantly running in the tank, even after flushing. This issue is usually caused by a malfunctioning flapper valve. The flapper doesn’t seal properly, and water keeps flowing into the bowl.

A plumber will start by inspecting the flapper and flush valve. They may replace the flapper if it’s worn out or out of alignment. If that doesn’t solve the issue, they’ll check the fill valve to make sure it’s functioning correctly. With a quick adjustment or part replacement, your toilet will be back to normal, plugging your skyrocketing bill effectively.

Weak Flush

If your toilet’s flush is weak, it could be because of low water levels in the tank, a clogged trap, or a worn-out flush valve. When the flush isn’t strong enough, waste won’t be fully removed, leading to repeated flushing and potential clogs.

A plumber will first check the water level in the tank and adjust it. If the water level is fine, they’ll inspect the flush valve, flapper, and flush handle. They might replace or repair any faulty parts. If the toilet’s trap is clogged, they’ll use a plumbing snake to clear the obstruction. With the right fixes, your toilet will flush with full force again.

Clogged Toilet

Clogs happen in every toilet at some point, but when they become frequent, it’s a sign of a bigger problem. A clogged toilet is usually caused by too much toilet paper, non-flushable items, or a buildup of waste.

For a typical clog, a plumber will start with a plunger. If the clog is deeper in the drain line, they may use a plumbing snake or auger to break it up. In more severe cases, they might use a hydrojetting system to clear the pipes. If tree roots are the cause of the clog, the plumber will use a rooter to remove them.

Toilet Tank That Won’t Fill Properly

A toilet tank that won’t fill after flushing is frustrating. Without enough water in the tank, your toilet won’t be able to flush properly. This issue is often caused by a faulty fill valve or float, which controls the water intake.

A plumber will check the fill valve, which may need cleaning or replacing. If the float isn’t working correctly, the plumber will adjust or replace it. They’ll also ensure that the water supply line is clear and working properly. By replacing any worn-out parts, the plumber will get your tank filling and flushing like it should.

Silent Leaks

A silent leak can be one of the sneakiest toilet problems. You might not notice it right away, but the constant dripping can increase your water bill and cause damage over time. Leaks usually happen at the base of the toilet or in the tank components.

To detect silent leaks, a plumber will start by inspecting the tank, flush valve, and seals. If they find any cracks or broken seals, they will replace them. The plumber might also use a dye test to check for leaks in the bowl. If there’s a leak around the base, they may need to replace the wax ring that seals the toilet to the floor. Once the leak is fixed, your toilet will stop wasting water.

Get Fail-Proof Toilet Repair With Ortega Plumbing Heating & Air

Toilet problems can be annoying, but they don’t have to be stressful. When you experience any of these issues, don’t hesitate to call a plumber. At Ortega Plumbing Heating & Air, we specialize in quick and reliable toilet repair. Our experienced plumbers know how to solve virtually all toilet issues efficiently.

Whether you need a simple fix like replacing a flapper or something more complicated like clearing a clog deep in the pipes, we’ve got you covered. We use the latest tools and techniques to ensure the job is done right the first time.

Call Ortega Plumbing Heating & Air to schedule a repair today!

Need Emergency Plumbing?

Call (505) 596-7154 now!

Reach out to Ortega Plumbing Heating & Air for fast, reliable emergency plumbing services.

Schedule Service

"*" indicates required fields